Search results Headings Excavation Headings Headings are small tunnels cut into the sides of trenches or shafts. They constitute the most hazardous sector of excavation as, in addition to the dangers associated with trenches and shafts, they introduce the risk of trapping persons with... E7-headings Installation tools BUILDING SAFETY Supports and Fixings Installation Installation tools The correct installation equipment must be used. Specified drill-bits – not just diameter but particularly depth stop drills are critical to the proper installation of certain fixings.... f2-installation-tools 12.2.5 Energy and Carbon Initiatives ENERGY, CLIMATE CHANGE, AND GREENHOUSE GAS MITIGATION 12.2 ENERGY EFFICIENCY 12.2.5 Energy and Carbon Initiatives 12.2.5.1 Green Construction Board The Green Construction Board is a subgroup of the Construction Leadership Council and is a consultative forum... 12-2-5-energy-and-carbon-initiatives Part 3 Construction (Design and Management) Regulations 2015 Part 3 - Health and Safety Duties and Roles General duties 8.—(1) A designer (including a principal designer) or contractor (including a principal contractor) appointed to work on a project must have... B4-part-3 0.3 Site Compound and the Site in General Setting up on Site 0.3 Site Compound and the Site in General 0.3.1 Preparing the site compound Consider if any topsoil is to be stripped, how this non-renewable resource will be protected and preserved for reuse how surface water will be drained from the... 0-3-site-compound-and-the-site-in-general 12.2.6.1 Construction phase ENERGY, CLIMATE CHANGE, AND GREENHOUSE GAS MITIGATION 12.2 ENERGY EFFICIENCY 12.2.6 Delivering Energy Efficient Construction 12.2.6.1 Construction phase The following summarises good practice for minimising energy consumption on construction sites. Early consideration... 12-2-6-1-construction-phase 0 Setting up on Site Setting up on Site Introduction When starting a new project and setting up on site there are many issues to consider for the protection of the environment. This Section of the Manual identifies several of those issues and the choices can be made to reduce the... 0-setting-up-on-site Principal contractor duties Site Logistics and Planning Appendix 4 - CLOCS (Construction Logistics and Community Safety) Principal contractor duties The compliance levels in this Standard are: must indicates an element which is mandatory to demonstrate the CLOCS compliance... a2-principal-contractor-duties Project Logistical and Traffic Management Planning Site Logistics and Planning General arrangements Project logistical and traffic management planning All projects require careful planning and management of off-site logistics to ensure the safe and timely delivery of components and materials. ... a2-project-logistical-and-traffic-management-planning Introduction Setting up on Site Introduction When starting a new project and setting up on site, many issues must be considered for the protection of the environment. This Section of the Manual identifies several of those issues and the choices that can be made to reduce... 0-intro-setting-up-on-site 1 2 3 4 5 6 7 8 9 10
